Alpha Communications AlphaRefuge 2100 Series 설치, 사용 및 배선 지침
{카테고리_이름} Alpha Communications AlphaRefuge 2100 Series에 대한 설치, 사용 및 배선 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Alpha Communications AlphaRefuge 2100 Series 18 페이지. Area of refuge and rescue assistance system
페이지 인쇄
AlphaRefuge™ 2100 Series (V3) Area of Refuge and Rescue
Assistance system Installation, Use and Wiring Instructions
Pre-Installation Requirements:
•
120V Power
•
Determine Communication:
1. Dedicated analog phone line from POTS, PBX, or Central Office.
2. VoIP - requires use of Alpha Model ABL-VOIP to connect Master to VoIP phone system.
3. Internal Intercom (no offsite calling) - requires Alpha Model 2100-LINESIM.
• Twisted, shielded 22 or 24 AWG wire cabling to connect each Refuge Call Box (RCB) to the
Refuge Command Center (RCC)
• Use 24V 18/2 wire for powering the Emergency Phones from the 24VDC Power Supply.
NOTE: Terminals and markings shown in this manual may not be in the order in which they appear
on the actual equipment. When installing, observe all national and local electrical and building
codes.
Copyright© 2011-2018, Alpha Communications®, All Rights Reserved.
AWD265
Rev. 2 (08/2019)