Alpha Data XRM2-CLINK-R-GIGE 사용자 설명서 - 페이지 7

{카테고리_이름} Alpha Data XRM2-CLINK-R-GIGE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alpha Data XRM2-CLINK-R-GIGE 12 페이지.

XRM2-CLINK-R-GIGE

User Manual

2 Installation

The XRM-CLINK-R-GIGE is designed to plug in to the front panel connector (SAMTEC QSH series) on the

FPGA base card. The retaining screws should be tightened to secure the XRM-CLINK-R-GIGE.

The XRM-CLINK-R-GIGE is designed to be used with Virtex 7 series cards and I/O voltages are set accordingly

Note:This operation should not be performed while the host PMC/XMC or PCI card is powered up.

Observe precautions for preventing damage to components by electrostatic discharge. Personnel handling the

board should take SSD precautions.

Avoid flexing the board.

SDR connector 3M part number 12226-8250-00FR

Standard RJ-45 connector

SDR cable assembly 3M part number 1SF26-L120-00C-XXX, where XXX= length in centimetres.

SDR to MDR cable assembly 3M part number 1MF26-L560-00C-XXX, where XXX= length in centimetres.

3.2.2 RJ-45 connector

Standard RJ-45 Cat 5e/6 cable.

RS232 transceiver controlled from FPGA implementing 3-wire interface. Connection via 3-pin 1.0 mm thru-hole

header.

XRM-CLINK-R-GIGE

For further information please contact Alpha Data.

Camera Link Specification v1.1 (Automated Imaging Association)

CameraLink Technology Brief Available from http://www.baslerweb.com

Xilinx EDK documentation. http://www.xilinx.com/ise/embedded_design_prod/platform_studio.htm