Dickinson SEA-B-QUE ROUND 운영자 매뉴얼 - 페이지 4

{카테고리_이름} Dickinson SEA-B-QUE ROUND에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dickinson SEA-B-QUE ROUND 9 페이지. Sea-b-que round propane barbecue

Igniter

The electrode for the igniter has already been installed for you. Simply plug the end of

the wire into the igniter button assembly and screw the assembly bracket to the left deck

leg . (See Diagram)

• Attach igniter bracket to base assembly with 2 3/8" screws

• Push the igniter body, electrode end first, into the bracket. It will click into place.

• Attach electrode to lead wire

Igniters seldom fail but if yours stops working try cleaning the probe. Built up grease

may have coated the probe, preventing the spark.

Burner Orifice

The orifice has a tiny hole in the burner that controls the maximum amount of fuel into

the burner. From time to time salt or other debri may plug the hole changing the flame

and / or the sea-b-que will not get hot, and a blocked orifice may be the reason. To clean

the orifice in the burner remove the grills and unscrew the flame spreader (top of burner)

counterclockwise. Now remove the 2 very small screws to take off the burner top cap.

Use a small metric socket to unscrew and remove the orifice. Clean with a very small

wire like the kind in a (twist tie) (actual size .031 dia). Do not expand the hole or the

sea-b-que will get too hot. Assemble in reverse order.

Mounting

Important Note:

safety reasons it is therefore advisable to mount the unit outboard.

#15-150A

#15-150F

#15-187

#15-150P

Visit

www.dickinsonmarine.com

Barbecues get hot and will splash, leak grease, and for

Universal Rail Mount Kit

Fishing Rod Holder Mount Kit

Taff Rail Mount Kit

Scotty Mount Kit

for pics and details