Dickson HT120 매뉴얼 - 페이지 4
{카테고리_이름} Dickson HT120에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dickson HT120 12 페이지. High-temp logger operation
페이지 인쇄
Getting Started
•
Install the DicksonWare™ Software.
•
Connect the cable (supplied with the software) to the logger and to a working serial port on your
computer.
•
Click the Setup button. When the setup window appears, all fields should be automatically filled in,
this will confirm that DicksonWare™ has recognized the logger. Should all fields remain blank, refer to
"No Communication" in the Trouble Shooting section of this manual. Once DicksonWare™ recognizes
the logger, press the Clear button. This will delete all data currently stored.
•
The logger is now sampling and ready for use. The default sample interval is 1 minute. You may
choose to change Default settings for sample interval and start-date and time. When changing
these settings, the logger will automatically go through the clear process to accept your changes.
Note: To conserve battery life when storing unit, press the Setup button and select the shortest Sample
Interval and Stop When Full in the Samples section. Do not expose download cable to temperatures above
175˚F
*WARNING*
Fire, explosion and server burn hazard. Do not recharge, disassemble, heat above 145˚C, incinerate, or
expose battery to water.
Rev. 07/07