Dickson TR220 매뉴얼

{카테고리_이름} Dickson TR220에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dickson TR220 2 페이지. Push to start logger operation

페이지 인쇄

SR200/TR220

Getting Started

• Install DicksonWare™ Software on your computer.

• Connect the cable (supplied with the software) to the

logger and to a working serial port on your computer.

• Click the Setup button. When the setup window

appears, all fields should be automatically filled in,

this will confirm that DicksonWare™ has recognized

the logger. Should all fields remain blank, refer to "No

Communication" in the Trouble Shooting section of

this manual. Once DicksonWare™ recognizes the

logger, press the Clear button. This will delete all data

currently stored.

Useful Features

Push to Start

Gives you the option to start logging data with the push

of a button.

Delayed Start

Program how many Days, Hours and Minutes must expire

before your unit begins logging.

Real Time Monitoring

Monitor and graph your process as it happens and print

and save from real time screen. (This feature should be

used sparingly as it causes the battery to drain quicker)

To Activate Push-to-Start Feature

Open software, connect logger to download cable and

click the SETUP button. Select the sample tab and click

the SETUP button to the right of the Start Date/Time

field. Select Push to Start as the Delay Type which will

DICKSON

Push to Start Logger Operation

• The logger is now sampling and ready for use. The

default sample interval is 1 minute. Verify that the

indicator light is flashing every 10 seconds. You may

choose to change Default settings for sample interval

and activate push to start feature. When changing

these settings, the logger will automatically go

through the clear process to accept your changes.

NOTE: If not using Push-to-Start feature: To conserve

battery life when storing unit, press the Setup button and

select the shortest Sample Interval and Stop When Full in

the Samples section.

Customize Graphed Data

DicksonWare™ calculates Min, Max and Average of all

data collected. Customize data by highlighting specific

data points which will recalculate MIN, MAX and

Average for highlighted information.

Export Data

A snapshot of your graph or a real-time graph of points

can be easily exported to other programs such as Excel™

or PowerPoint™.

CLICK ON THE FEATURES BUTTON IN THE

SOFTWARE FOR DETAILED INSTRUCTIONS ON

HOW TO USE ABOVE FEATURES

require the logger to go through the clearing process.

The logger will start only when the button is pressed

and held for 2-4 seconds. The LED will flash 3 times to

confirm that the logging has started.