Dickson KT6P1 시작하기 - 페이지 2

{카테고리_이름} Dickson KT6P1에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Dickson KT6P1 7 페이지. Remote sensing temperature recorder
Dickson KT6P1에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (9 페이지)

페이지 인쇄

Figure 2

Keypad and Button Functions

On/Off

The On/Off key turns the unit on and off.

Pen Home

If the pen is located on the outside edge of the chart, press Pen Home to move pen to recording position.

If the pen is located on the chart, press Pen Home to move the pen to the outside edge of the chart.

Alarm (KT6P5)

1. To set the alarm, make sure unit is on and press and hold the Alarm button. The LED will blink red

rapidly for about five seconds, then the LED will turn solid green. Release the Alarm button and the

LED will turn solid red. At this point the display will show "On" or "Off".

Pressing either the Adjust-Up or Adjust-Down buttons, located on the back of the unit next to the dip

switch, will toggle the alarm on or off.

2. Pressing PEN HOME will scroll to the next alarm option. The options are as follows:

Alarm on or off

Dickson KT6P Manual V3

1.800.561.8187

Figure 3

www.

.com

[email protected]