Alpha ESS Smile5-BAT 빠른 설치 매뉴얼 - 페이지 6
{카테고리_이름} Alpha ESS Smile5-BAT에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alpha ESS Smile5-BAT 7 페이지. Battery module
Alpha ESS Smile5-BAT에 대해서도 마찬가지입니다: 설치 매뉴얼 (10 페이지)
페이지 인쇄
CONFIGURATION with GOODWE INVERTER
GoodWe (EM, ES, SBP series)
The communication cable between INV and BAT is
not regular net cable, it should be as below:
1. If there is only one BAT, DIP switch of BAT should
be as below:
Battery
DIP 1
DIP 1
Position
OFF
ON
one BAT
DIP
DIP 1
DIP 1
Switch
ON
WE
ON
OFF
1 2 3 4
2. If there are two or more than two BAT, DIP switch
of BAT should be as below:
Battery
DIP 1
DIP 1
DIP 1
Position
OFF
OFF
ON
other
BAT
Farthest
OFF
ON
ON
BAT
If there are two or more than two BAT, after connecting the
power cables, please refer to the following the steps:
A. Only connect the communication cable between batteries at the
first. Turn on the batteries and they will get into standby mode
(green light flickering 1s).
B. Until batteries get into work mode (green light flickering 10s)
and then connect the communication cable between BAT and INV.
DIP
DIP 1
Switch
ON
WE
OFF
1 2 3 4
ON
WE
OFF
1 2 3 4