Alpha IP FAL 210 1 Series 매뉴얼 - 페이지 16
{카테고리_이름} Alpha IP FAL 210 1 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alpha IP FAL 210 1 Series 17 페이지.
Cleaning
10 Cleaning
Only use a dry and solvent-free, soft cloth for cleaning.
11 Resetting factory settings
All settings will be lost when the factory settings are restored.
1. Keep the System key (A) pressed for 4 seconds, until it flashes rapidly in orange.
2. Release the System key.
3. Press the System key again for 4 seconds until it lights up in green.
4. Release the System key again.
9 The factory settings are reset.
9 The device restarts.
12 Decommissioning
Warning
Danger to life due to the electrical voltage at the base station!
• Only an authorised electrician may open the device.
• Always disconnect from the mains network and secure against unintended activation before opening.
• Disconnect external voltages and secure against activation.
1. Loosen all connected cables.
2. Uninstall the device and dispose of properly.
13 Disposal
Do not dispose the device with domestic waste! Electronic devices/products must be disposed of
according to the Directive for Waste Electrical and Electronic Equipment at the local collection
points for waste electronic equipment.
This manual is protected by copyright. All rights reserved. It may not be copied, reproduced, abbrevi-
ated or transmitted, neither in whole nor in parts, in any form, neither mechanically nor
electronically, without the previous consent of the manufacturer. © 2016
16