Epcom XMR Series 사용자 설명서 - 페이지 9

{카테고리_이름} Epcom XMR Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epcom XMR Series 17 페이지. Fhd dual lens dash cam with gps
Epcom XMR Series에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지), 사용자 설명서 (12 페이지), 사용자 설명서 (8 페이지)

페이지 인쇄
Epcom XMR Series 사용자 설명서
SETUP>>DEVICE
Select the "Setup", you will enter into all the parameters configurations, the all items are as
follow:
ID
1
Brightness
2
Screen off
3
Screen sensor
4
Vibration
5
Infrared
6
Infrared Power
7
F button
8
Indicator light
1. Brightness
Adjust the brightness of the screen, just drag the icon to adjust.
2. Screen off
Switch off the screen after a certain time if there is any operation, which will save the power
consumption.
3. Screen sensor
When the option is on, and if the sensor detected, it will turn off screen automatically.
4. Vibration
When option is on, It will remind the users that the function is in use through vibration.
5. Infrared
This option means you can enable or disable the Infrared function.
6. Infrared power
There are two options for this function, high means
7. F button
You can define a function for the F button: Flash, sound, laser light, IR manually, playback, or
enter into setup interface.
8. Indicator light
When the option is OFF, which means all the indicator light will be off when camera is start up,
ON means it will display all the LED normally..
Menu
Flash, sound, laser light, IR manually, playback, setup
Options
Drag the icon to adjust
30sec,1min,3min,5min,OFF
ON,OFF
ON,OFF
ON, OFF
High, Low
ON, OFF
7