www.axis.com
General
Hardware &
Aluminium rack, 19" / 3U
System
Available slots: 12 (support hot swap)
Connections
Video: Analog video input/s (BNC)
Power: 100-240 VAC, 50/60 Hz, 1,6 A
Each slot contains the following connectiors on the rear of
the rack:
Network: 10Base-T/100Base-TX Ethernet networks (RJ-45)
Serial communication: RS-232 & RS-485 (terminal block)
I/O: alarm inputs and outputs (terminal block)
5 º C to 50 º C (41 º F to 122 º F )
Operating
conditions
Humidity: 20-80% RHG
Dimensions
Height: 132 mm (5.2")
Width: 482 mm (19.0")
Depth: 300 mm (11.8")
Weight
3.3 kg (7.3 lb.) including PSU
1. Video input(s) are located on the blade
2. Number of inputs and outputs varies between different types of Blade
3. Ensure proper ventilation/cooling when installing multiple racks
The following Blade Video Servers are available. Further information will be found
in the respective video server datasheet. Functionality of a blade server is exactly
the same as the stand alone version of the video server.
Product
No. of channels
4
240Q Blade
241Q Blade
4
241S Blade
1
* Requires the AXIS 2191 Audio Module
Note: Please see separate datasheets for all stand-alone video servers
©2011 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB
in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right
to introduce modifications without notice.
Technical Specifications – AXIS Rack Solution
1
2
3
AXIS Blade Video Servers
Product Selection Guide
Video
Total Frame Rate
compression
(NTSC/PAL)
Motion JPEG
24/20
Motion JPEG/
120/100
MPEG-4
Motion JPEG/
30/25
MPEG-4
Shipping contains Video server rack
Power supply module (installed)
Blanking panels (installed)
Connector kit
Mains cable
Installation guide
Approvals
EMC:
CE compliant according to: EN55024:1998 +A1,
EN61000-6-1:2001, EN61000-6-2:2001, EN55022:1998 +A1
Class B, EN61000-3-2:2000, EN61000-3-3:1995 +A1
FCC Part 15 subpart B demonstrated by compliance with
EN55022:1998
VCCI:2002 Class B ITE
C-tick AS/NZS 3548
Safety:
EN60950
More information is available at www.axis.com
Each blade is shipped with connector kit, installation guide for video server rack and
the respective video server manual.
Video Motion
Alarm
Detection
inputs/outputs
Yes
4/4
Yes
4/4
Yes
4/4
PTZ
HTTPS
support
support
Yes
Yes
Yes
Yes
Yes
Yes
Audio
No
No
No
페이지 인쇄