EPE Conseil ESI 22 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} EPE Conseil ESI 22에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EPE Conseil ESI 22 3 페이지.
페이지 인쇄
• Plug checking mode:
To change to the plug checking mode, press and release the mode button "select" once.
The optical display at the top of the display unit is activated. The lower green LED is permanently illuminated, the upper red LED
comes on when an electric field is present. The plug checking mode allows you to test whether an electrical device without grounding, has its socket
plugged the right way around. Just hold the ESI 22 near the device (e.g. lamp) you want to test, with the device's switch set on OFF. If an electric field is
present when the device is off, the socket is probably plugged the wrong way around.
• Battery saving function
The ESI 22 electrosmog indicator automatically turns off after 10 minutes, in order to save power. The ESI 22 electrosmog indicator can be
switched on again immediately
•
Battery monitoring
The ESI 22 electrosmog indicator features automatic battery monitoring. When the battery is low the red LED from the location mode flashes several times
and the unit switches off automatically. Reliable display of field strengths can no longer be guaranteed until the battery is changed. Do not throw away the
used battery; it may still have some life available for other uses (e.g. in a remote control unit or similar).
The ESI 22 was made in Europe.
Contact: E.P.E. Conseil, Vincent Joly, Le Vieux Serrant, 49170 Savennières, France, [email protected], N° SIRET : 53093796000017
.