Alpha Microsystems AM-990 서비스 매뉴얼 - 페이지 17

{카테고리_이름} Alpha Microsystems AM-990에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alpha Microsystems AM-990 18 페이지. For authorized service personnel only: am-990 vme service manual
Alpha Microsystems AM-990에 대해서도 마찬가지입니다: 서비스 매뉴얼 (15 페이지)

페이지 인쇄

Page 14

If your computer includes an AM-522 ESDI controller board, the maximum memory

capacity is reduced to 12 megabytes. The AM-522 board requires one of the memory

expansion slots for installation.

SBC Expansion I/O

The AM-145 board has one 60-pin connector, located at J9, designed to support a

maximum of 32 serial ports. These ports are in addition to the two standard AM-145

serial I/O ports (0 and 1) shown in the illustration.

AM-355 I/O boards attached to connector J9 use the same interface driver used by the

two serial ports on the CPU board, AM145.IDV. AM-358 and AM-359 I/O paddle cards

connected to the AM-355 I/O bus use the interface drivers called AM358.IDV and

AM359.IDV. Other types of boards designed to be used on the AM-355 I/O bus have

their own unique drivers.

For information on jumper settings, port numbering, and I/O addresses, see the

installation guide shipped with the AM-355 I/O bus device you are installing.

AM-990 SBC Computer Service Manual

DSS-10524-00, Rev. A01