Axis 250S Blade 설치 매뉴얼 - 페이지 2

{카테고리_이름} Axis 250S Blade에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axis 250S Blade 8 페이지. Rack solution installation
Axis 250S Blade에 대해서도 마찬가지입니다: 사양 (2 페이지)

페이지 인쇄

About This Document

This document is intended as an addendum to the video

server User's Manual. It includes instructions for installing

the Axis Rack Mounted Video Server Solution on your

network. Later versions of this document will be posted to

the Axis Web site, as required.

Intellectual Property Rights -

intellectual property rights relating to technology embodied

in the product described in this document. In particular,

and without limitation, these intellectual property rights

may include one or more of the patents listed at

http://www.axis.com/patent.htm and one or more

additional patents or pending patent applications in the US

and other countries.

Legal Considerations -

prohibited by laws that vary from country to country.

Check the laws in your local region before using this

product for surveillance purposes.

Electromagnetic Compatibility (EMC) -

equipment generates, uses, and can radiate radio frequency

energy, and if not installed and used in accordance with the

instruction manual, may cause interference to radio

communications. Shielded cables should be used to ensure

compliance with EMC standards.

US -

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or

more of the following measures: Reorient or relocate the

receiving antenna. Increase the separation between the

equipment and receiver. Connect the equipment into an

outlet on a circuit different from that to which the receiver

is connected. Consult the dealer or an experienced radio/TV

technician for help.

Europe -

This digital equipment fulfills the

requirements for radiated emission according to limit B of

EN55022, and the requirements for immunity according to

EN55024 residential, commercial, and light industry.

Japan -

This is a class B product based on the standard of

the Voluntary Control Council for Interference from

Information Technology Equipment (VCCI). If this is used

near a radio or television receiver in a domestic

environment, it may cause radio interference. Install and

AXIS COMMUNICATIONS

<Product Name> Quick User's Guide

Axis AB has

Camera surveillance can be

This

use the equipment according to the instruction manual

Australia -

This electronic device meets the requirements of

the Radio communications (Electromagnetic Compatibility)

Standard 1998 AS/NZS 3548. Compliance is not valid for

unshielded network cables.

Liability -

Every care has been taken in the preparation of

this manual; Please inform your local Axis office of any

inaccuracies or omissions. Axis Communications AB cannot be

held responsible for any technical or typographical errors and

reserves the right to make changes to the product and manuals

without prior notice. Axis Communications AB makes no

warranty of any kind with regard to the material contained

within this document, including, but not limited to, the implied

warranties of merchantability and fitness for a particular

purpose. Axis Communications AB shall not be liable nor

responsible for incidental or consequential damages in

connection with the furnishing, performance or use of this

material.

Trademark Acknowledgments -

Ethernet, IBM, Internet Explorer, Linux, Macintosh, Microsoft,

Netscape Navigator, UNIX, Windows, WWW are registered

trademarks of the respective holders. Java and all Java-based

trademarks and logos are trademarks or registered trademarks

of Sun Microsystems, Inc. in the United States and other

countries. Axis Communications AB is independent of Sun

Microsystems Inc.

Support Services -

Should you require any technical

assistance, please contact your Axis reseller. If your questions

cannot be answered immediately, your reseller will forward

your queries through the appropriate channels to ensure a rapid

response. If you are connected to the Internet, you can:

•

download user documentation and firmware updates

•

find answers to resolved problems in the FAQ database.

Search by product, category, or phrases

•

report problems to Axis support staff by logging in to your

private support area

Visit the Axis Support Web at www.axis.com/techsup

Battery Replacement -

Server Solution uses a 3.0V CR2032 Lithium battery as the

power supply for its internal real-time clock (RTC). This battery

will, under normal conditions, last for a minimum of 5 years.

Low battery power affects the operation of the RTC, causing it

to reset at every power-up. A log message will appear when

battery replacement is required.. The battery should not be

replaced unless required! If the battery needs replacing, please

observe the following points:

• Caution! Danger of explosion if battery is incorrectly replaced

• Replace only with the same or equivalent battery, as

recommended by the manufacturer

• Dispose of used batteries according to the manufacturer's

instructions

Acrobat, Adobe, Boa,

The Axis Rack Mounted Video