Dictator 790050 기술 매뉴얼 - 페이지 3

{카테고리_이름} Dictator 790050에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dictator 790050 17 페이지. Ac-21 sliding door operators

1 Door operator with U-bracket*

2 Idler pulley with U-bracket*

3 Belt fixing device

4 Wall bracket for the door operator

5 Wall bracket

6 Toothed belt

7 Supporting roller with U-bracket

8 Additional belt fixing device

for second door leaf

(* The 0.55 kW series is delivered without U-brackets

for door operator and idler pulley.)

Components Included

DICTAMAT 900-21

Separate Accessories

Tel. (0821)24673 - 0 • Fax (0821) 24673 - 90 • E-Mail [email protected] • 0099

Components

The AC-21 door operators transmit the power to the door with the help of a revolving

toothed belt. They are normally fixed to the wall, as the rails cannot take up the

forces resulting from the action of the mechanical brake.

The following picture shows the components of a AC-21 door operator system for

sliding doors.

• Door operator: worm gear transmission with a 230/400 VAC three-phase motor

and integrated mechanical brake, integrated thermal cutout, 2 m connection cable

to the control system, driving wheel for toothed belt

• U-bracket for the door operator*

• Idler pulley for toothed belt with integrated tensioning device and U-bracket*

• Belt fixing device for the door

• Integrated encoder

• Mechanical cranking device

• Electromagnetic clutch

• Toothed belt (type depends on the motor)

• Wall bracket for the door operator

• Wall bracket for the idler pulley

• Supporting roller with U-bracket for the toothed belt

• Wall bracket for the supporting roller

• Additional belt fixing device for sliding doors with two leaves

AC-21 Sliding Door Operators

DICTAMAT 900-21

Page 04.013.00