Dictator DICTAMAT 50 WS-MFL 기술 매뉴얼 - 페이지 9

{카테고리_이름} Dictator DICTAMAT 50 WS-MFL에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dictator DICTAMAT 50 WS-MFL 17 페이지.

Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 201906

C) Installation of the DICTAMAT 50 WS-MFL - cont.

3d) Mounting the wire rope

- Guide the wire rope in the freewheel direction (usually the opening

direction of the door) through the corresponding bore with the plastic

bush in the wire rope attachment of the damper (see also point C/2d).

- Guide the wire rope through the bore in the clamp piece. Then fix it

there from below by means of the headless pins (internal hexagon

wrench size SW 3) (see ill. 19).

Clamp

piece

Fixing

- Guide the wire rope through one of the bores of the bracket for the

wire rope tensioner. You have to choose the bore so that the wire rope

will be perfectly aligned. Then insert the wire rope in the bore of the

wire rope tensioner. Doing this turn the worm inside the wire rope

tensioner.

ATTENTION: The wire rope tensioner is NOT fixed to the bracket, but

is held by the tensioned rope once the mounting has been finished.

Technical Manual

DICTAMAT 50 WS-MFL

. 18

Ill

. 19

Ill

. 20

Ill

Page D50WS-MFLHB.09