Dictator RZ-24 기술 매뉴얼 - 페이지 17

{카테고리_이름} Dictator RZ-24에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dictator RZ-24 19 페이지. Central

페이지 인쇄

7a) Steps for Placing into

Operation

7b) Functional Tests,

Approval

Ill. 11

Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 20220325

7. Placing into Operation of the Hold-Open System

- After having connected all components in the RZ-24 central, close the

cover and secure it with the 4 screws.

- Switch on the voltage supply.

When everything has been connected

correctly =>

the horn in the casing will sound,

the red LED (1) on the cover will be

on.

- Reset the fire detection line by

pressing the key RESET (2) on the

cover. The horn will be switched off.

Now the system is ready for

operation.

When the system is ready for operation, its correct functioning and its

installation according to the regulations has to be stated by an approval

test. Only a correspondingly trained and authorized professional may

effect this approval test.

Extent of the approval test

- Checking whether all installed devices are included in the approval of

the RZ-24.

- Verifying whether the labelling of the installed devices corresponds to

the labelling specified in the approval of the building authorities.

- Checking the interaction of all devices: Tripping by simulating the fire

parameter on which is based the functioning principle of the detectors

(e.g. smoke detectors by aerosol) as well as manually (pressing the

hand release switch on the central and the ones installed beside the

door).

- Checking whether the closure (door etc.) is also released for the

automatic closing if the hold-open system doesn't work (e.g. due to a

power cut or a defect detector, to be simulated by removing a detector

and cutting the 230 V supply of the RZ-24 central).

After the successful approval test, the operating company has to perma-

nently fix a plate of 105 mm x 52 mm in the immediate vicinity of the

closure which has to be provided by the manufacturer of the hold-open

system and reads

Type approval no. Z-6.500–2443

Company logo

Hold-open system

Approved by

month/year

Technical Manual

RZ-24 Central

(2)

(3)

(1)

Ill. 10

Page 07.021.17