Epever EPIPDB-COM-10 사용자 설명서 - 페이지 5
{카테고리_이름} Epever EPIPDB-COM-10에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epever EPIPDB-COM-10 8 페이지. Dual battery solar controller
페이지 인쇄
Note: in the normal charging status, the controller will divide the charging
as the setting. While battery #1 is fully charged, more charge current will be
diverted to battery #2, and return to the setting charging automatically
when the battery #1 is in low voltage.
When the controller detects there is only battery #1, all the charging will go
to the battery #1 automatically.
rd
3.
3
led is for charging frequency.
Number shows
3.Trouble shooting
1.
LED blinking, short circuit, check the PV and battery, and make sure
that they are in correct connection
2.
LED slowly flashing, fully charged
3.
LED ON, on charging
4.
LED frequent flashing, with battery, no charging
5.
LED OFF, no battery or over voltage
2
3
4
5
6
7
8
9
90%(pre-set)
PWM Charging frequency
0
1
2
20%
30%
40%
50%
60%
70%
80%
25Hz(pre-set)
50Hz
100Hz
3
80%
70%
60%
50%
40%
30%
20%
10%