Axis exacqVision Edge 빠른 시작 매뉴얼

{카테고리_이름} Axis exacqVision Edge에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axis exacqVision Edge 5 페이지.

Introduction

exacqVision Edge is a variation of the standard exacqVision Server application that operates on a compatible Axis camera. It can

record video from the local camera directly to the SD memory card in the camera or remote drives. The exacqVision Client

application can connect to any combination of embedded and standard servers simultaneously; however, the exacqVision Web

Service cannot be supported on an embedded camera because of processing requirements.

Requirements



A one-channel license from Exacq Technologies must be obtained for each embedded camera.



exacqVision Edge is compatible with Axis ACAP cameras:



The camera must be running version 5.2 firmware or later (5.4 or later if remote storage drives are used).



An SDHC class 10 or better SD memory card no larger than 32GB, purchased separately, is required for each camera.

NOTE: Up to 2GB is reserved for exacqVision Edge operations and cannot be used for exacqVision Edge data storage.

Block Diagram

exacqVision Edge/Axis Quick Start Guide

www.exacq.com

+1.317.845.5710

USA (Corporate Headquarters)

+5255.56080817

Mexico

+44.1438.310163

Europe/Middle East/Asia

+31.485.324.347

Central Europe

Page 1 of 5

5/2/2012