Axis S2016 사용자 설명서 - 페이지 9
{카테고리_이름} Axis S2016에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axis S2016 18 페이지. Camera station s20 appliance series
Axis S2016에 대해서도 마찬가지입니다: 설치 매뉴얼 (17 페이지), 사용자 설명서 (14 페이지)
페이지 인쇄
AXIS Camera Station S20 Appliance Series
Manage the built-in switch
How to reset the switch to factory default settings
Note
If you've forgotten your new IP address or password and can't access the switch, contact Axis support.
1. Open the switch's webpage.
2. Go to Admin > Maintenance.
3. Click Reset to factory default.
4. Reboot the switch.
How to change the switch's password
You can change the default password to a password you choose yourself.
Important
Make sure you select a password you remember. If you've forgotten the new password, contact Axis support.
1. Open the switch's webpage.
2. Go to Admin > Security.
3. Enter User name and Password.
4. Enter the New password and confirm it.
5. Click Save.
6. Reboot the switch.
How to backup the switch's settings
Note
The username and password are not included in the backup file.
1. Open the switch's webpage.
2. Go to Admin > Maintenance.
3. Click Backup settings.
4. Save the .gz file.
How to restore the switch's settings to previous backup
Note
To restore the switch's settings you must previously have created a backup file.
1. Open the switch's webpage.
2. Go to Admin > Maintenance.
3. Click Browse.
4. Select the appropriate .gz file. Make sure that the model name and serial number in the file name match your device.
5. Click Restore. Once the settings are restored, the switch will automatically reboot to accept all restored changes.
9