Axis S2024 사용자 설명서 - 페이지 7
{카테고리_이름} Axis S2024에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axis S2024 18 페이지. Camera station s20 appliance series
Axis S2024에 대해서도 마찬가지입니다: 설치 매뉴얼 (17 페이지), 사용자 설명서 (14 페이지)
페이지 인쇄
AXIS Camera Station S20 Appliance Series
Manage the built-in switch
Manage the built-in switch
About the built-in switch
The AXIS Camera Station S20 Appliance Series comes with an integrated Power over Ethernet (PoE) switch. You configure and manage
the built-in switch from a webpage.
The purpose of the switch is to segregate traffic on the network so that security cameras and related traffic managed by the switch
(PoE ports and U1 network connections) are not shared with other networks.
The switch's power management follow these rules:
•
Each port reserves power according to the connected powered device's PoE class.
•
If the actual power consumption for a given port exceeds the reserved power for that port, it will shut down.
•
Ports will shut down when the actual power consumption for all ports exceeds the total amount of power that the
power supply can deliver. The ports are then shut down according to the ports priority where a lower port number
means higher priority.
How to open the switch's webpage
1. From your desktop, open the Get Started application and go to PoE Switch.
2. Click Go to PoE switch website.
3. Log in with user name admin and password system.
The first time you log in you'll be prompted to change the password.
Note
You can also open the switch's webpage via a browser: enter the switch's IP address 192.168.50.1 in the browser's
address field.
How to reboot the switch
Important
While the switch reboots, all connected devices will temporarily lose connection with the switch (including PoE).
1. Open the switch's webpage.
2. Go to Admin > Maintenance.
3. Click Reboot switch.
How to improve security for used ports
You can lock a MAC address to a port so that only traffic coming from that MAC address will pass. This improves security and prevents
unauthorized users from connecting a laptop or other devices to the security network.
1. Open the switch's webpage.
2. Go to ACL.
3. For each port you want to lock the MAC address for, click ACL enabled.
Note
Click Enable all to lock the MAC addresses for all ports at once.
7