Axis 150 빠른 설치 매뉴얼 - 페이지 2

{카테고리_이름} Axis 150에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axis 150 8 페이지. High performance multiprotocol print server for virtually all networks

Quick Installation Guide

This guide covers the installation and basic setup procedures for the

AXIS 150/152. If you need more detailed instructions, please refer to

the AXIS 150/152 User's Manual.

Physical Description

LPT1 Printer

Connector

LPT1 Printer

Connector

Installing the AXIS 150/152

You should proceed with the following instructions, as appropriate

for your type of network. Refer to all relevant sections if you intend

to use the AXIS 150/152 in a multiprotocol environment.

1. Note the serial number found on the underside label of the AXIS

150/152. You need this number during the configuration.

2. Switch off the printer. Remove the AXIS 150/152 power supply.

3. AXIS 150 only: Connect your AXIS 150 to the network using a

shielded twisted pair (10baseT) cable.

4. AXIS 152 only: Connect your AXIS 152 to the network using a

shielded thin wire (10base2) cable.

5. Switch on the printer. Connect the AXIS 150/152 power supply.

6. Ensure that the Network Indicator is flashing. To check the

connections, print a Test Page by depressing the Test Button.

External Power

LPT2 Printer

Supply Connector

Connector

AXIS 150 Network Print Server

External Power

LPT2 Printer

Supply Connector

Connector

AXIS 152 Network Print Server

Ethernet

Connector

Test Button

Network Indicator

Power Indicator

Ethernet

Connector

Test Button

Network Indicator

Power Indicator