Axis 1650 설정 지침 - 페이지 14

{카테고리_이름} Axis 1650에 대한 설정 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Axis 1650 16 페이지. Axis 1650 print server: installation guide
Axis 1650에 대해서도 마찬가지입니다: 설정 지침 (14 페이지)

페이지 인쇄

Scanning

Now you have prepared your computer for

scanning via AXIS 1650.

Note: These steps are just needed prior to the

first scanning from the computer.

Starting a Scan from the Canon Device

When you have established a connection be-

tween your computer and the scanner with

AXIS ScanClient, place the object to be

scanned on the scanner flatbed.

1. If the Canon device is in Energy Save

mode, press its [Energy Saver key].

2. Press [Scan] on the Canon device.

3. Press [Start] on the Canon device.

4. The scanning will start.

5. When ready, remove the scanned object

from the flatbed and walk back to your

computer.

6. Close the receiving program on your

computer and end the scanning session

(see below).

Note: When waking up from Power Off or En-

ergy Save mode the Canon device needs some

time (from 30 seconds to a few minutes) to

adjust the light and the scanner to produce

optimum scans. Press [Start] repeatedly until

scanning starts.