Axis 640 series 빠른 설치 매뉴얼 - 페이지 8

{카테고리_이름} Axis 640 series에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axis 640 series 12 페이지. Ethernet and token ring print servers
Axis 640 series에 대해서도 마찬가지입니다: 사양 (6 페이지), 사용자 설명서 (4 페이지)

페이지 인쇄

Note:

If you want to install a printer to a new LPR port, refer to the

User's Manual section 5 for further details.

Client-server printing:

The AXIS Print Monitor is not needed on the client platforms for

client-server printing.

Windows 3.1 and Windows for Workgroups

All Windows 3.1 and Windows for Workgroups users requiring

access to a network printer in peer-to-peer mode, will need to install

the AXIS Print Utility for Windows onto their workstations.

Client-server printing:

This print method is suitable for larger networks and requires only

one user to install the AXIS Print Utility for Windows software onto

their workstation. The setup procedure is described below:

1. Install AXIS Print Utility for Windows onto the file server.

2. Set up your AXIS 540/640 from the file server as described in the

peer-to-peer printing section below, but additionally check the

Share box for your printer.

Your shared printers can now be used by all the Windows clients and

you do not need to install the AXIS Print Utility on the clients.

Important note:

The server setup described above should only be made on a

Windows for Workgroups workstation.

Peer-to-peer printing:

This print method does not require a file server and is recommended

for smaller networks. Follow these steps to install your

AXIS 540/640 for peer-to-peer printing at a Windows for

Workgroups or Windows 3.1 workstation:

1. Double-click the AXIS Print Utility icon.

2. In the Port menu, click Add.

3. In the NPS Port list, select the AXIS 540/640 port to be installed.

The ports appear as <name>.LP1, where <name> is AX followed

by last six digits of the AXIS 540/640 serial number, e.g.

AX540B35.LP1

Note that this alphanumeric name will be superseded by any new

name given to your AXIS 540/640 when using AXIS NetPilot™.

4. Accept or change the suggested Windows port name, and type

any comments in the Description field. Make a note of the

Windows port name as you will need this later. Click OK to

install the Windows port.

5. In the Port menu, click Connect to bring up the Windows

Printers dialog.

6. Select a printer driver from the list of Installed Printers, or click

Add>> to install a new driver. Click Connect...