Epever IP1500-11 사용자 설명서 - 페이지 6

{카테고리_이름} Epever IP1500-11에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epever IP1500-11 20 페이지. Pure sine wave inverter

 The wire connects between battery and inverter should be

shorter than 3m, the current density should be less than

3.5A/mm

longer than 3m, the current density should be reduced.

 A fuse or breaker should be used between battery and inverter,

the value of fuse or breaker should be twice of the inverter rated

input current.

 Do not connect the battery charger or similar devices to the

input terminal of the inverter.

 Do not put the inverter close to the flooded lead-acid battery

because the sparkle in the terminals may ignite the hydrogen

released by the battery.

 It's an off-grid inverter, do not connect the AC output terminals

to the grid or electrical source, otherwise the inverter may be

damaged.

 This inverter can only be used singly, parallel connection or in

series will damage the inverters.

 Risk of electric shock, don't touch output port when the inverter

is working. The output is forbidden to connect other power

sources or grid, otherwise the inverter will be damaged. The

inverter must be in off, when connecting load.

 Do not attempt to repair the fault inverter by yourself, otherwise it

may lead to a serious accident. Please contact the manufacture'

s engineer.

while the output of inverter is fully loaded. If the wire