3Com 3CNJ1000PSL-US - NJ1000/NJ2000 Local Ac-to-dc 48V Power Supply 빠른 시작 매뉴얼 - 페이지 13

{카테고리_이름} 3Com 3CNJ1000PSL-US - NJ1000/NJ2000 Local Ac-to-dc 48V Power Supply에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com 3CNJ1000PSL-US - NJ1000/NJ2000 Local Ac-to-dc 48V Power Supply 16 페이지. 3com intellijack nj1000: quick start

페이지 인쇄
3
Pull the NJ1000 down to lock the hooks tightly into the slots. Be sure
to match the screwholes in the bracket and the NJ1000. Secure the
NJ1000 using the T-10 torx screw that came in the NJ1000 package
8. Connect the Local Power Supply (Optional)
If the network does not support PoE, you can use the optional local power supply. To
connect the local power supply to the NJ1000, follow these steps:
1
Connect the round connector of the local power supply to the
NJ1000 (as shown in the next diagram).
2
Plug the power cord of the local power supply into an AC outlet.
WARNING: Use only the local power supply available from 3Com. Failure to do so
may result in damage to the NJ1000 or may result in a hazardous situation.
13