Epever IPower Series 사용자 설명서 - 페이지 8

{카테고리_이름} Epever IPower Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epever IPower Series 20 페이지. Pure sine wave inverter
Epever IPower Series에 대해서도 마찬가지입니다: 매뉴얼 (2 페이지), 사용자 설명서 (20 페이지)

페이지 인쇄

Operation Steps:

Step 1: Turn off the switch of inverter

Step 2: Connect the battery ('+' terminal with red line, '-'with black

line). Do not connect them by contraries, or the power inverter will

be damaged.

Step 3: Connect the protective grounding to the ground

Step 4: Connect the AC load to the AC outlet

Step 5: Switch on the fuse or breaker. Switch the inverter to ON

and then turn on the loads one by one. Check the operation state of

both power inverter and loads. 'Green' of the Working indicator

means the state is normal.

Step 6: If there are different loads, it is suggested that turn on the

load with large startup current first, such as television, then turn on

the load such as lamp when the inverter works stably.

Step 7: If the Fault indicator is 'Red' and the buzzer alarms or no

output when you turn on devices, switch off the loads and

power inverter immediately. Check the system by referring to the

troubleshooting guide. Turn on the devices again according to the

operation methods after the failure is removed.