Epever LS1012E 사용자 설명서 - 페이지 12

{카테고리_이름} Epever LS1012E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epever LS1012E 20 페이지. Solar charge controller
Epever LS1012E에 대해서도 마찬가지입니다: 매뉴얼 (2 페이지)

페이지 인쇄

5 Protection and Troubleshooting

5.1 Protection

· Load Overload

If the load current exceeds 1.25 times of rated current for 60 seconds,

or the load amp is 1.5 times of rated current for 5 seconds, the

controller will disconnect the load. Overload must be cleared up

through powering on again or pressing the setting button.

· Load Short Circuit

Fully protected from load wiring short circuit (exceeds 2 times of

rated current) automatically. One automatic load reconnect attempt,

the fault must be cleared by reapply power or pressing the setting

button.

· Battery Reverse Polarity

Fully protection form battery reverse polarity, no damage to the

controller will result. Correct the mistake of wiring to resume normal

operation.

· Damaged Local Temperature Sensor

If the temperature sensor short-circuited or damaged, the controller

will be charging or discharging at the default temperature 25℃ to

prevent the battery damaged from overcharging or over discharged.