DIEBOLD G1-950N 사용자 설명서

{카테고리_이름} DIEBOLD G1-950N에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DIEBOLD G1-950N 2 페이지. Private container with electronic combination lock

User＇ s Manual for Private Container with Electronic Combination Lock

Applies to Model B-23E2

Please read this User＇ s Manual carefully before using this product.

Its factory code is: 1、5、9.

Open the door of the private container (See ＂Using the Override Key＂in Page 2).

Take out the 4AA batteries from the Private Container, and install it in its

compartment. (See＂To Replace the Batteries＂in Page 2.)

Enter the code, then pressing the＂　＃　＂ button. The green LED will come on. Turn

the knob clockwise

Close the door of Private Container, then turn the knob counterclockwise

and the door will be locked.

Open the door of Private Container and press the red programming button (See

the Figure) located on the back of the door inside the Private Container, coming

into process of programming the user code (yellow LED will be on).

Enter your new user code (2-8 digits) followed by pressing the ＂　＃　＂ button.

JJB-23E2、JJB-23E2 -1 、G1-950N、G1-951N、G1-952N、G1-953N and B-23E2-1

F i r s t T i m e O p e r a t i o n

within 5 seconds to open the door of this Private Container.

Note: The factory code 1、5、9 should be used to open the door of the

Private Container for the first time. Please program your new

user code after the first operation. Refer to ＂To Program Your

User Code＂for details.

The interval between two button pressing operations should not

exceed 20 seconds, otherwise this operation will become invalid.

T o C l o s e

T o P r o g r a m Y o u r U s e r C o d e

Note: Please repeat operating the Private Container with your new user

code according to ＂To Open＂for several times to confirm that

your new user code can open the door. Then close the door and turn

knob counterclockwise

Please keep your new user code in a safe place as the

old code becomes invalid now.

Shanghai Diebold Security Equipment Co., Ltd.

Add. : 1188 Caobao Rd., Shanghai, 201102, P.R. China

Tel : 86-21-6480 1118

Website: http:// www.diebold.cn

T o O p e n

Programming Button

Fax : 86-21-6480 1238