Axis FA54 사용자 설명서 - 페이지 14

{카테고리_이름} Axis FA54에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axis FA54 16 페이지. Main unit
Axis FA54에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 설치 매뉴얼 (20 페이지)

Axis FA54 사용자 설명서
AXIS FA54 Main Unit
Technical specifications
Network connector
RJ45 Ethernet connector.
Audio connector
The Axis product has the following audio connectors:
Audio in – 3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).
Audio out – 3.5 mm output for audio (line level) that can be connected to a public address (PA) system or an active
speaker with a built-in amplifier. A stereo connector must be used for audio out.
3.5 mm audio connectors
(stereo)
Audio Input
Audio Output
I/O connectors
Use the I/O connector with external devices in combination with, for example, tampering alarms, motion detection, event triggering,
and alarm notifications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to:
Digital output - For connecting external devices such as relays and LEDs. Connected devices can be activated by the VAPIX®
Application Programming Interface or in the product's webpage.
Digital input - For connecting devices that can toggle between an open and closed circuit, for example PIR sensors, door/window
contacts, and glass break detectors.
6-pin configurable terminal block
Function
0 V DC (-)
DC output
Configurable
(Input or Output)
1 Tip
Microphone/Line in
Line out (mono)
Pin
Notes
1
DC ground
2
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
3–6
Digital input – Connect to pin 1 to activate, or leave floating
(unconnected) to deactivate.
Digital output – Connected to pin 1 when activated, floating
(unconnected) when deactivated. If used with an inductive load, e.g.
a relay, a diode must be connected in parallel with the load, for
protection against voltage transients.
2 Ring
14
3 Sleeve
Ground
Ground
Specifications
0 V DC
12 V DC
Max load = 50 mA
0 to max 30 V DC
0 to max 30 V DC, open drain,
100 mA