Axis FA54 사용자 설명서 - 페이지 13

{카테고리_이름} Axis FA54에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axis FA54 19 페이지. Main unit
Axis FA54에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 설치 매뉴얼 (20 페이지)

AXIS FA54 Main Unit

Troubleshooting

If you can't find what you're looking for here, try the troubleshooting section at axis.com/support

Important

Reset to factory default should be used with caution. A reset to factory default resets all settings, including the IP address, to

the factory default values.

To reset the product to the factory default settings:

1. Disconnect power from the product.

2. Press and hold the control button while reconnecting power. See Product overview on page 4 .

3. Keep the control button pressed for 15–30 seconds until the status LED indicator flashes amber.

4. Release the control button. The process is complete when the status LED indicator turns green. The product has been reset

to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90

5. Use the installation and management software tools to assign an IP address, set the password, and access the video stream.

The installation and management software tools are available from the support pages on axis.com/support

It is also possible to reset parameters to factory default through the web interface. Go to Settings > System > Maintenance and

click Default.

Firmware is the software that determines the functionality of network devices. One of your first actions when troubleshooting a

problem should be to check the current firmware version. The latest version may contain a correction that fixes your particular

problem.

To check the current firmware:

1. Go to the product's webpage.

2. Click on the help menu.

3. Click About.

Important

Preconfigured and customized settings are saved when the firmware is upgraded (provided that the features are available in

the new firmware) although this is not guaranteed by Axis Communications AB.

Important

Make sure the product remains connected to the power source throughout the upgrade process.

Note

When you upgrade the product with the latest firmware, the product receives the latest functionality available. Always read

the upgrade instructions and release notes available with each new release before upgrading the firmware. To find the latest

firmware and the release notes, go to axis.com/support/firmware