Epever RTU 4G F 사용자 설명서

{카테고리_이름} Epever RTU 4G F에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epever RTU 4G F 2 페이지.

페이지 인쇄

HUIZHOU EPEVER TECHNOLOGY CO., LTD

※ Thanks for selecting the EPEVER RTU 4G F data transmission

terminal. Please read this manual carefully before using.

※ This product is not waterproof or dustproof. Do not use it in humid,

salt

spray,

corrosion,

accumulative, or other severe environments.

USER MANUAL

EPEVER RTU 4G F

1. Overview

EPEVER RTU 4G F is a new wireless data transmission terminal based on

the 4G network. With the GSM/GPRS SIM card, the solar controllers,

inverters, or inverter/chargers connected to the terminal can easily access

the EPEVER cloud server. It helps realize remote, wireless, and networked

communication among devices quickly.

Features:



Automatic restore after disconnection



Support Unicom and mobile network



Support PC software, serial port command, SMS command



Support RS485 communication



Support TCP/UDP protocol



Support PC or phone APP to monitor status and program parameters

2. Appearance

(1) Pin definition for the RS485 terminal:

No.

(2) Pin definition for the DC power terminal (5.08-2P):

No.

VCC

Power positive (DC 9~36V)

GND

❽

(3) Press the yellow button

, and the SIM card slot is pushed out.

3. Accessories



Included accessories

Picture

Name

4G antenna

RJ45 to 5.08 cable

(CC-RJ45-5.08 2P-

150)

greasy,

flammable,

explosive,

❶

Indicator

❷

RS232 terminal (Reserved)

❸

⑴

RS485 terminal

❹

Antenna connector

❺

Upgrade port

❻

DC power connector

❼

DC power terminal (5.08-2P)

❽

SIM card slot push-out button

❾

SIM card slot

Definition

RS485-A

RS485-B

Definition

Power ground

Function

Connect

with

the

❹

connector

for data sending or

receiving.

Connect the RS485

❸

with device's RJ45

terminal

com. port for communication.

TEL: +86-752-3889706



Optional accessories

dust

4. Indicator instruction

Indicator

DATA

LINK

Cat1

WORK

POWER

5. System connection

Install the EPEVER RTU 4G F by the sequence following:

① Communication Part: Connect the SIM card, 4G antenna, and

communication cables.

② Power Part: Power on the EPEVER RTU 4G F by connecting a battery.

⑵

⑶

6. APP operation

Note: Add the RTU module and the connected device to the cloud server by

website (https://hncloud.epsolarpv.com) or APP. Then you will be able to

monitor the device and set parameters by PC or APP (the following takes

APP as an example).

antenna

1. Download APP

Apple APP store

Connect with the DC power

2 Pin connector

terminal

Connect the RS485

terminal

3.81 to 5.08 cable

(CC-3.81 2P-5.08

terminal of the iTracer-AD/

2P-150)

iTracer-ND/ DuoRacer-N for

communication.

Connect the RS485 terminal

DB9 to 5.08 cable

with the DB9 com. terminal of the

(CC-DB9(M)-5.08

UP-Hi/ UP-Hi-F/ UP-Hi-PRO etc.

2P-150)

for communication.

Status

ON solid: Data is transmitting,

Data indicator

OFF: No data transmission

Socket A/B

ON solid: Socket A/B connection

connection indicator

successful, OFF: No connection

2G connection

ON solid: 2G network connection

indicator

successful, OFF: No connection

Cat-1 connection

ON solid: Cat-1 network connection

indicator

successful, OFF: No connection

Work indicator

It blinks during normal operation.

Power indicator

Red ON: Power on, OFF: Power off

Google

Play

Website: www.epever.com

❼

for power supplying.

❸

with the 3.81 com.

❸

Instruction