Epever GoMate Series 사용자 설명서 - 페이지 4

{카테고리_이름} Epever GoMate Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epever GoMate Series 20 페이지. Flush mount solar charger

Thank you for selecting the GoMate series solar charge controller.

Please read this manual carefully before using the product and pay

attention to the safety information. Please reserve this manual for

future review.

Important Safety Instructions

This manual contains all instructions of safety, installation, and operation of GoMate

series controller ("the controller" is referred to this manual).

 Read all the instructions and warnings carefully before installation.

 No user serviceable component inside the controller. DO NOT disassemble or

attempt to repair the controller.

 Avoid direct sunlight, high temperatures and DO NOT install the controller at

locations where water can get in.

 Install the controller at well-ventilated places, the controller's heat sink will be very

hot during the system operation.

 Appropriate external fuses or breakers are suggested.

 Please cut off all connections of the PV array, fuses or breakers which close to the

battery before the controller installation and adjustment.

 Power connections must remain tight to avoid excessive overheating from the

loose connection.

BEIJING EPSOLAR TECHNOLOGY CO.,LTD.