Axis M1045-LW 사용자 설명서 - 페이지 12

{카테고리_이름} Axis M1045-LW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axis M1045-LW 20 페이지.
Axis M1045-LW에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

AXIS M1045-LW Network Camera

Additional settings

Important

To ensure successful certificate validation, time synchronization should be performed on all clients and servers prior to

configuration.

Configure the wireless settings using WPA

1. Go to Settings > System > Wireless

2. In the list, select the wireless network.

3. Under WPA-Enterprise protocol, select EAP-PEAP/MSCHAPv2.

4. Enter the user Identity associated with your certificate.

5. Enter the Password for your user identity.

6. Select the PEAP Version (0 or 1) as used in the access point.

7. Select the PEAP Label that the access point uses when using PEAP version 1. Select 1 to use client EAP encryption; select

2 to use client PEAP encryption.

8. Select the EAPOL version (1 or 2) as used in the access point.

9. Select the CA certificate with which to validate the network/AP certificate.

10. Click Save.

Wireless certificates

Wireless network certificates are used to authenticate devices on a wireless network. Wireless networks using the

WPA

-/WPA2-Enterprise security method are protected by EAPOL (Extensible Authentication Protocol Over Lan), which is part of

the IEEE 802.1X standard. The client authenticates the server using digital certificates. The server authenticates the client using

digital certificates or a password depending on the selected WPA-Enterprise type.

-/WPA2-Enterprise and EAP-PEAP/MSCHAPv2