Axis Network Camera AXIS 221 전원 설명서
{카테고리_이름} Axis Network Camera AXIS 221에 대한 전원 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axis Network Camera AXIS 221 2 페이지. Network camera
Axis Network Camera AXIS 221에 대해서도 마찬가지입니다: 사양 (6 페이지), 브로셔 (2 페이지), 사양 (2 페이지), 브로셔 (1 페이지), 데이터시트 (2 페이지)
페이지 인쇄
Camera Housing
This document is an addendum to the Camera
Housing & Accessories Operating Instructions and
describes how to connect power to the AXIS 221
installed in the outdoor housing. Please read
through both instructions carefully before
proceeding with the installation.
Camera housing with AXIS 221 installed
Follow the instructions in the Camera Housing &
Accessories Operating Instructions to install the
Axis network camera.
Follow these instructions to connect power to the
camera:
Connect the supplied cable from the power connector
in the camera housing (1,3) to the connector on the
back of the camera (2,4).
2
4
4
2
No.
Color
Description
1
Black
Power connector GND (-)
2
Black
Camera GND (-)
3
Red
Power connector DC Power (+)
4
Red
Camera DC Power (+)
This description applies to the following articles:
Item
VT Power Supply OHEPS19
VT Verso Housing HPV42K1A000
AXIS 221 Network Camera
3
1
Important!
Make sure that the + and - wires are connected correctly. If not,
the camera may be damaged when power is applied.
Part no.
0217-011
0217-001
0221-0xx