EPH Controls RFRP-OT 운영 지침 - 페이지 2

{카테고리_이름} EPH Controls RFRP-OT에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. EPH Controls RFRP-OT 4 페이지. Wireless room thermostat

페이지 인쇄

RFRP-OT Room Thermostat

6.2 Button description

Automatic

AUTO

MAN

OFF

PROG

mode

(Back)

Manual

mode

O mode

Program mode

7. Resetting the thermostat

Press the

button on the side of the thermostat.

RESET

'rst no' will appear on the screen.

Press the

button.

'rst yes' will appear on the screen.

Press the 'OK' button to reset the thermostat.

8. Keypad lock and unlock

To lock the keypad, press and hold the

will appear on the screen. The keypad is now locked.

To unlock the keypad, press and hold the

will disappear from the screen. The keypad is now unlocked.

9. Setting the date, time and operating mode

Press the 'TIME' button once, the day will begin ashing.

Press the

buttons to adjust the year.

Press the

buttons to adjust the month. Press the 'OK' button.

Press the

buttons to adjust the day.

Press the

buttons to adjust the hour.

Press the

buttons to adjust the minute. Press the 'OK' button.

Press the

buttons to adjust from 5/2d to 7d or 24h mode.

Press the

buttons to turn DST (Day Light Saving time) On or O .

Press the 'AUTO' button or wait 5 seconds and the thermostat will return to

normal operation.

10. Factory program settings

Mon-Fri

21˚C

10˚C

08:00

10:00

Sat-Sun

21˚C

10˚C

Mon-Fri

21˚C

10˚C

08:00

10:00

Sat-Sun

21˚C

10˚C

Everyday

21˚C

10˚C

Set point increase

Wireless connect button

Set point decrease

Reset button

OK con rm button

TIME

HOL

COPY

BOOST

Boost mode

Copy function

Holiday mode

Set Date/ Time

OFF

and

buttons for 10 seconds.

and

buttons for 10 seconds.

Press the 'OK' button.

5/2d

5/2D

10˚C

21˚C

12:00

14:00

17:30

10˚C

21˚C

10˚C

21˚C

12:00

14:00

17:30

10˚C

21˚C

24H

10˚C

21˚C

EPH Controls Ireland

[email protected] www.ephcontrols.com

Boiler

Wireless

11. Adjusting the program settings for 5/2d

Press the 'PROG' button once.

Programming for Monday to Friday is now selected.

Press the

Repeat this process to adjust P2 to P6 times and temperatures.

Press the 'OK' button.

Programming for Saturday to Sunday is now selected.

Press the

Repeat this process to adjust P2 to P6 times and temperatures.

Press the 'AUTO' button to return to automatic mode.

While in PROG Mode pressing the 'PROG' button will jump from P1-P2 etc

without changing the temperature.

While in PROG Mode pressing the 'TIME' button will jump to the next Day

(block of days).

If 7 D mode is selected, you can program each day of the week with 6

individual times and temperatures.

If 24H mode is selected, you can only program each day of the week with

the same 6 times and temperatures.

12. Copy function

Copy function may only be used if the thermostat is in the 7d mode.

Set the times and temperatures for the day that you wish to copy from in

PROG Mode.

When still on the day press the 'COPY' button.

The day of the week that you have selected will be shown with 'COPY'

below it.

The next day will begin to ash on the top of the screen.

Press the

You can copy to multiple days using the

Press the 'OK' button when copying has been completed.

13. Temporary override

When in AUTO mode, press the

temperature setpoint.

'OvEr' will appear on the screen.

Press 'OK' or after 5 seconds the thermostat will operate in this temporary

override, util the next switching time.

To cancel temporary override, press the 'OFF' buttton and then press the

10˚C

'AUTO' button to return to the automatic mode.

23:00

10˚C

14. Permanent override

Press the 'MAN' button to enter Manual Mode (Permanent Override).

'MAN' will appear on the screen.

10˚C

Press the

23:00

Press 'OK' to con rm the temperature selection or after 5 seconds the

10˚C

thermostat will operate in this permanent override.

The thermostat will operate in MAN mode until the mode is changed.

To cancel permanent override, press the 'OFF' button and then press the

'AUTO' button to return to automatic mode.

10˚C

EPH Controls UK

[email protected] www.ephcontrols.co.uk

Plus

Page 2 of 4

Operating Instructions

buttons to adjust the P1 time. Press the 'OK' button.

buttons to adjust the P1 temp. Press the 'OK' button.

buttons to adjust the P1 time. Press the 'OK' button.

buttons to adjust the P1 temp. Press the 'OK' button.

button to copy the times and temperatures to that day.

button to skip a day.

button.

buttons to adjust the

buttons to adjust the temperature setpoint.

20190627_RFRP-OT_OpIns_JW