DieHard 200.71230 운영자 매뉴얼 - 페이지 19

{카테고리_이름} DieHard 200.71230에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DieHard 200.71230 20 페이지. Battery charger 40/2 amp manual 200 amp engine starter
DieHard 200.71230에 대해서도 마찬가지입니다: 소유자 매뉴얼 (14 페이지), 소유자 매뉴얼 (14 페이지)

페이지 인쇄

PROBLEM

Ammeter reads less than

selected charge rate when

charging a discharged

battery.

Charger makes a loud

buzz or hum.

Ammeter reading stays

high.

POSSIBLE CAUSE

Extension cord too long or

wire gauge too small.

Weak cell or sulfated plate

in battery.

Battery is only partially

discharged.

Transformer laminations

vibrate (buzz).

Shorted diode (hum).

Battery is severely dis-

charged.

•

SOLUTION/REASONS

Use shorter or heavier

gauge extension cord.

Sulfated battery will

eventually take a normal

charge if left connected. If

the battery will not take a

charge, have it tested by a

Sears technician.

Continue charging battery.

Continue charging. Buzz

is not abnormal.

Have charger tested by

Sears technician.

Continue charging battery

for two more hours. If

problem continues, have

the battery checked by a

Sears or other qualified

service dealer.