DieHard 28.7123 운영자 매뉴얼 - 페이지 9

{카테고리_이름} DieHard 28.7123에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DieHard 28.7123 18 페이지. 12v manual battery charger & engine starter

fOLLOW thESE StEPS WhEN BattERY IS OUtSIDE vEhIcLE

7.1

Check the polarity of the battery posts. The POSITIVE (POS, P, +) battery post

usually has a larger diameter than the NEGATIVE (NEG, N, -) post.

7.2

Attach at least a 24-inch (61 cm) long 6-gauge (AWG) insulated battery cable

to the NEGATIVE (NEG, N, -) battery post.

7.3

Connect the POSITIVE (RED) charger clip to the POSITIVE (POS, P, +) post

of the battery.

7.4

Position yourself and the free end of the cable you previously attached to the

NEGATIVE (NEG, N, -) battery post as far away from the battery as possible –

then connect the NEGATIVE (BLACK) charger clip to the free end of the cable.

7.5

Do not face the battery when making the final connection.

7.6

Connect charger AC supply cord to electrical outlet.

7.7

When disconnecting the charger, always do so in the reverse order of the

connecting procedure and break the first connection while as far away from the

battery as practical.

7.8

A marine (boat) battery must be removed and charged on shore. To charge it

onboard requires equipment specially designed for marine use.

a SPaRK NEaR thE BattERY

MaY caUSE a BattERY

EXPLOSION. tO REDUcE thE

RISK Of a SPaRK NEaR thE

BattERY:

•