Diehl IZAR RE 868 TEMP 설치 매뉴얼 - 페이지 3

{카테고리_이름} Diehl IZAR RE 868 TEMP에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diehl IZAR RE 868 TEMP 8 페이지.

2.3 D

IMENSIONS

3 I

NSTALLATION PRECAUTIONS

3.1 I

NSTALLATION

IZAR RE TEMP module may be installed in different environments (except full immersion).

This product is cast in resin and can be placed outside without any protection.

The sensor must be installed in an appropriate place corresponding to the desired unit of

temperature measurement (center of a room, without direct exposure to sunlight...).

3.2 S

ECURING SYSTEM

IZAR RE TEMP module may be installed in different ways, to suit various environments.

The standard installation is as follows:

Fix IZAR RE 868 TEMPERATURE onto a wall with 2 screws (provided with the

module),

then

orientation of the module vertically or horizontally.

To remove the module, carry out the steps of the operation in reverse order.

Caution:

The product must be installed and used in full compliance with the instructions



given in this technical manual.

The fitter shall be liable for any operation or installation that does not



comply with good installation rules and instructions, and Diehl Metering

disclaims all liability in this respect.

03/2016

Support structure to

be fixed on the wall

slide

the module

Mounting rail

fig.2

onto

its

support

fig.1

structure. Adjust

the

IZAR RE 868 TEMP | 3

English