Axis Electronics NANO Series 사용자 설명서 - 페이지 11

{카테고리_이름} Axis Electronics NANO Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Axis Electronics NANO Series 17 페이지. Electronic weighing scale

pieces selected. Simply press the counting button once, if the user

wants to exit the counting function to come in to the weighing

mode.

5.6.2

PRINT FUNCTION: When a certain weight value or counting value or

percentage value is being displayed, keep this button pressed for

three seconds. The display will now show "PRINT". Press enter

button, the will show "DONE" and go back to the working mode.

6 SCALE SETTINGS:

This menu allows you to do various setting related to scale like auto

zero, glow, scroll mode, dummy zero setting, dual range, filter etc.

6.1

the TARE button and then switch on the

scale. The display will show "Auto 0"

(Valid Values are 0.0, 0.5, 1.0, 2.0 and

3.0d). This is the auto zero setting. Press

there ZERO button You can now select

the value using the MODE (M) button. 3.0d means 3 divisions Default

setting of Auto-Zero mode is 3d.

6.2

When the scale is switched on and it is

idle, there are 2 types of modes which

we can choose from, and the display will

perform accordingly. When the display

shows "SCROLL" in the scale setting

mode,

press the ZERO button and the

display will show "Yes" or "No". You can

NANO Series Precision Balance

Press and hold