Diehl Metering IZAR RDC 사용자 설명서 - 페이지 11

{카테고리_이름} Diehl Metering IZAR RDC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Diehl Metering IZAR RDC 20 페이지.

IZAR RDC Battery

6 MAINTENANCE

IZAR RDC BATTERY requires no specific maintenance.

Do not clean it with solvents or abrasive cleaners, as these would damage the plastic shell.

If necessary, use a damp cloth or sponge.

Storage: The product should be stored in a dry place at temperatures between: - 20°C ... + 70°C.

Prolonged storage at high temperatures may cause significant loss of autonomy.

Only use the Diehl Metering referenced battery pack!

Caution: Risk of explosion if the battery pack is replaced by an incorrect battery

pack type!

Caution: if an external power supply is used, disconnect the connector before

any housing handling

The battery pack can be replaced directly on site. The following steps should be followed:

1) Open the housing

2) Disconnect and remove the battery pack

3) Install the new battery pack

4) Reinstall the cushioning foam

5) Connect the new battery pack

6) Close the housing

Note: during battery pack replacement, configuration settings are kept in non-volatile memory

without risk of data loss.

For battery pack recycling, please refer to chapter "Recycling".

08/2019