Acculaim Dyna Drum HO QW 사용자 설명서 - 페이지 10

{카테고리_이름} Acculaim Dyna Drum HO QW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acculaim Dyna Drum HO QW 20 페이지.

페이지 인쇄

Operation

Operation of the fixture will commence as soon as

power is applied and the user display on the rear

panel will first show

Addr

show

or a DMX address number (if a valid

DMX input is present). The fixture may or may not

immediately show output from its emitters - this will

depend upon the settings within the menu and/or

control input.

Note: The sealed control buttons use capacitive sensors

similar to your smartphone screen and will not respond

to touch if you are wearing gloves.

Entering the menu

Press and hold the

now access the menu.

If the keylock feature has been enabled (see page 13), '0' will flash on the display. Enter the

password (between 1 and 9999) using the

Note: The menu will automatically exit one minute after the last button press. While the menu

remains active, all emitter output will be suppressed.

Menu navigation

Once you have entered the menu you can use the four control buttons to navigate around

the menu and alter settings as necessary. The next two pages list the main menu items.

8 second

press to

initially

enter the

The menu will automatically exit one minute after the last button press (all emitter output

will be suppressed while the menu remains active). You can exit from the menu immediately

by pressing and holding the

ACCL

(Acclaim) and then either

button for roughly 8 seconds until the

Use the arrow

buttons to move

between main

menu items

button until output is restored.

buttons

Addr

and

buttons and press the

Control

User

display

entry flashes. You can

button.

ENTER

Use the arrow

buttons to

increase or

decrease a

setting

Press ENTER to

save a setting

(or press MENU

to exit without

saving)