Olympus 80 - Stylus 80 Quartz Date 35mm Camera 사용자 설명서 - 페이지 7
{카테고리_이름} Olympus 80 - Stylus 80 Quartz Date 35mm Camera에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus 80 - Stylus 80 Quartz Date 35mm Camera 13 페이지. Stylus 80 instruction manual (portuguese)
Olympus 80 - Stylus 80 Quartz Date 35mm Camera에 대해서도 마찬가지입니다: (영어) 지침 (13 페이지), (프랑스어) Mode D'emploi (13 페이지), (포르투갈어) 매뉴얼 (13 페이지)
페이지 인쇄
Auto Flash
12
1
1. Press the shutter release button to
make sure the orange lamp lights.
Flash working range (with color negative film)
ISO
Wide angle (W)
100
0.6 to 3.5 m (2.0 to 11.5 ft)
200
0.6 to 4.9 m (2.0 to 15.7 ft)
400
0.6 to 7.0 m (2.0 to 23.0 ft)
Note: When slide film is used, the working range at the telephoto side
will be reduced by about 40%.
Red-Eye Reduction Flash
A series of low-power pre-flashes before the main flash
accustoms the subject's eyes to the light and helps prevent
their eyes from appearing red in a photograph.
Eyes appear red.
Hold the camera securely. It takes about 1 second until the shutter releases.
Red-eye reduction may not be effective when the subject:
1. Is not looking at the flash from right in front.
2. Is not watching the pre-flashes.
3. Is too far from the camera.
The effectiveness of red-eye reduction varies depending on the individual
characteristics of each subject.
2
2. Press the shutter release
button all the way to take
the picture.
Telephoto (T)
0.6 to 1.8 m (2.0 to 5.9 ft)
0.6 to 2.5 m (2.0 to 8.2 ft)
0.6 to 3.6 m (2.0 to 11.8 ft)
Flash-Off
Use this mode in situations where flash photography is not
desired or is prohibited or in twilight or night scenes.
Closing the lens barrier restores the Auto Flash mode.
Since a slow shutter speed (as low as 2 seconds) is selected, use a
tripod to prevent camera-shake.
Have your subject stay still; otherwise, blurring may result.
Fill-In Flash
Use this mode to compensate for a shadow cast on the
subject's face or to shoot in backlit conditions or under
fluorescent light.
Closing the lens barrier restores the Auto Flash mode.
Make sure your subject is within the flash working range (p.12).
Fill-in flash becomes ineffective in extremely bright conditions.
13