Olympus 8080 - CAMEDIA C Wide Zoom Digital Camera 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Olympus 8080 - CAMEDIA C Wide Zoom Digital Camera에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus 8080 - CAMEDIA C Wide Zoom Digital Camera 2 페이지. C-8080 wide zoom quick start guide (portuguese)
Olympus 8080 - CAMEDIA C Wide Zoom Digital Camera에 대해서도 마찬가지입니다: (포르투갈어) 실무 가이드 (2 페이지)

페이지 인쇄

Olympus 8080 - CAMEDIA C Wide Zoom Digital Camera 빠른 시작 매뉴얼

TAKING PICTURES

There are two ways to compose your subject: using the

monitor or with the viewfinder. Depending upon the shooting

situation, there may be advantages to each method. Please

refer to the printed Basic Manual for more information.

Taking a Picture with the Monitor

• Set the mode dial to P and press the power switch. The

viewfinder turns on.

• To shoot using the monitor, press f to turn the monitor

on.

• Compose your subject in the viewfinder or on the monitor.

1/ 1/200

200

Green lamp

# Flash stand-by

3264*2448

Icons representing camera settings appear on the

monitor, telling you important information such as the

flash and record modes, battery check, and the number

of storable still pictures.

• Press the shutter button halfway.

Shutter button

VIEWING AND

ERASING PICTURES

With a Digital camera, you can easily view the photos you

want—and delete the ones you don't.

Viewing Pictures

There are two ways to access the Playback mode:

• Set the mode dial to q and press the power switch.

• If the camera is in the shooting mode with the lens barrel

extended, press the QUICK VIEW button.

The last picture taken appears in the monitor. Use

bdac to scroll through all the images saved on your

xD-Picture Card.

CONNECTING THE CAMERA

TO A COMPUTER

TIP

: Olympus recommends using the optional AC adapter to ensure a consistent

power supply when downloading images.

Make sure that the camera is turned off before connecting it to

your computer.

Windows 98 users must install the "USB Driver for Windows 98"

software before connecting the Digital camera to the computer.

Refer to the Software Installation Guide for complete information.

Olympus makes it simple to connect the Digital camera to your computer.

INSTALLING THE CAMERA

SOFTWARE

You've now mastered the basic functionality of your new Olympus

Digital Camera! You are now ready to begin exploring the possibilities

that digital photography brings to your computer. Activities such as

photo editing, printing, and much more are only steps away!

About the Olympus CAMEDIA Master CD-ROM

Your Olympus Digital Camera comes bundled with a suite of software and documentation.

The CD includes:

• CAMEDIA Master: To download pictures from the camera, view, organize, retouch and print

your digital photos and movies.

• USB Driver for Windows 98: This utility must be installed to allow the camera to communicate

with your computer if it uses the Microsoft Windows 98 operating system.

• Olympus Digital Camera Reference Manual: A complete reference guide in digital form,

saved on the CD in PDF format.

You are now ready to install the computer software.

• Open the CAMEDIA Master CD-ROM package and locate the Software Installation Guide in

the language you wish to use.

• Continue to follow the step-by-step instructions for installing the software, and enjoy your new

digital photo processing capabilities!

The Digital camera confirms the focus and exposure are

properly set when the green lamp lights steadily. The #

indicator informs you that the flash is recommended and/

or recharging (when blinking); or ready to fire (when

steady).

• Press the shutter button completely to take the picture.

A short beep confirms your picture has been taken.

Zooming

This Digital camera features a zoom lens, allowing you

to get closer to the action, or for taking wide-angle shots

that get everything into the picture.

F5.6

• Push the zoom lever toward W to zoom out and get

everything into the picture.

• Pull the zoom lever toward T to choose telephoto shooting

and get closer to the action.

Flash Modes

This Digital camera features multiple flash modes.

Please note that not all flash modes are available

depending on the shooting mode selected.

• Press the flash pop-up button.

• Set the flash mode by turning the control dial while holding

down #:

When you are finished reviewing your pictures:

• Press the power switch again to turn the monitor off.

• To return to the shooting mode, press the QUICK VIEW

button again.

Erasing Pictures

The beauty of digital photography is your ability to keep

the photos you want, delete the rest, and reuse empty

memory space to take new pictures. This Digital camera

offers two ways to permanently erase unwanted digital

photos:

Single-Frame Erase: Deletes only the picture currently

displayed in the monitor.

Once erased, pictures cannot be restored.

• Make sure that "PC" is selected in the camera setting menus

(factory default setting).

• Turn the camera off.

• Plug the supplied USB cable into the USB connector on your

camera and computer as illustrated at right.

• Set the mode dial to q and press the power switch. The camera

starts communicating with the PC.

For detailed instructions on operations such as downloading and

copying image files, refer to the Reference Manual on the CD-

ROM.

Push to Zoom out

Pull to Zoom in

Additional Camera Features

This Digital camera offers a host of advanced features to expand your creativity. Here's just a small sampling.

See the Basic Manual for details on these capabilities, and more!

• Advanced photographic control: Aperture Priority, Shutter Priority, and full Manual modes are

available to give you complete control of your photography.

• 4 Scene Program Shooting Modes: This camera has 4 shooting modes to choose from depending on

the shooting conditions and the effect you want to achieve.

• Macro Mode and Super Macro Mode: For taking extremely tight close-up pictures.

• Sequential Shooting: Take a rapid succession of still pictures.

• Still Picture Editing: Edit still pictures and store them as new pictures.

• Movie Recording: Yes, this Digital camera records movies with sound!

• Close-up Playback: Enlarge the pictures in the monitor to check details of the selected image.

• Index Display: View several thumbnail pictures on the monitor at once.

• Protecting Pictures: Prevents you from accidentally erasing photos.

• Video Playback: View your pictures and movies on a television monitor.

• Panorama Shooting: Connect overlapping images into a single picture using the panorama mode and

Olympus CAMEDIA Master software.

• Direct Printing: Connect directly to your PictBridge-compatible printer with the USB cable to print your

favorite images easily.

TIP

: Remember to complete and return your Registration Card (not provided in some areas), and keep all camera

documentation handy.

Technical Support (USA)

1-888-553-4448 (Toll-free)

8:00 AM - 10:00 PM ET

Monday - Friday

Icon

Flash Mode

Description

Auto-flash

The camera automatically decides if the flash is

indication

needed.

Red-eye

Reduces incidence of red-eye by emitting pre-flashes

Reduction Flash

to shrink pupil size before firing the main flash. The

strobe effect is normal operation for this mode.

Fill-in Flash

The flash always fires with every picture.

#SLOW1

Slow

Adjusts the flash for special situations requiring slow

Synchronization

shutter speeds.

Flash off

Turns the flash off for times when flash photography is

prohibited or not desired. The flash never fires.

With the shutter button depressed halfway, the flash is

ready to fire when the # in the monitor lights steadily.

When # blinks, the flash is charging.

Number of Storable Pictures

Your digital camera can handle xD-Picture Card from

16 MB to 512 MB. The number of storable pictures

depends on the image quality selected.

See the Reference Manual for complete descriptions of

each recording mode and the storable frame capacity for

the various resolution modes and xD-Picture Card

capacities.

TIP

: To find out how many frames you have left, look for the number

in the lower right corner. Remember, you can always delete

unwanted pictures to make room for more. (See Step 5.)

• Set the mode dial to q and press the power switch.

• Use the arrow pad to display the picture you want to erase.

• Press S.

• Press ac to select YES, then press e.

TIP

: Images can also be erased while in the "QUICK VIEW"

mode described in step 5a. This makes it easy to quickly

erase a picture that you just took.

All-Frame Erase: Deletes all pictures on the xD-Picture

Card in one operation, except for pictures you have

protected.

Once erased, pictures cannot be restored.

• Set the mode dial to q and turn the power switch to ON.

• Press e, then press d to select MODE MENU.

• Use ac to select the CARD tab, then press d twice to

access the CARD SETUP screen.

• R ALL ERASE should be highlighted. Press e.

• As a safeguard, the Digital camera will ask you to select

YES or NO to confirm erasing, as this process permanently

deletes all unprotected pictures. Select YES and press e.

European Technical Customer Support

00800-67 10 83 00 (Toll-free)

+49 180 5 - 67 10 83 or +49 40 - 237 73 899

(Charged)

9:00 AM - 6:00 PM MET

Monday - Friday