Olympus BondMaster 600 시작하기 매뉴얼 - 페이지 6
{카테고리_이름} Olympus BondMaster 600에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus BondMaster 600 12 페이지. Composite bond tester
Olympus BondMaster 600에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (1 페이지), 빠른 시작 매뉴얼 (1 페이지), 사양 (2 페이지)
페이지 인쇄
Main Inspection Screen
After the initial steps have been completed via the
quick-setup menu or PowerLink menu, the main
inspection screen is displayed.
The battery power indicator always remains visible at
the top of the screen, except when in full-screen mode.
The time and date also always remain visible, except
when in full-screen mode.
The quick-access bar is located at the top left of the main
inspection screen. It displays either the instrument's
combined horizontal and vertical gain settings,
horizontal gain only, vertical gain only, or angle when
the GAIN (
) direct function key is pressed. The
quick-access bar remains visible until any other key is pressed.
Quick-access bar (setting not displayed in this example)
Enter and
Return keys
Direct function
keys
The real-time readings bar displays user-configurable readings (measurements). It displays a
maximum of two real-time readings from among the available choices. You can set the real-time
readings bar to display one or two readings, or you can deactivate it.
The instrument settings are displayed on the right hand side of the main screen. The displayed
settings information changes, depending on the menu key that is pressed. The menu keys are the five
keys located at the bottom of the front panel: MAIN (
MEM (
), and ADV/SETUP (
The MicroSD indicator appears in the bottom right-hand corner of the screen when a removable
MicroSD memory card is inserted in its slot. This slot is located behind the I/O door on the right-hand
side of the instrument.
Depending on the context and on the available functions and options, various indicators and
numerical values appear on the screen and around the main measurement value.
6
Real-time readings bar
Menu keys
), DISP/DOTS (
).
BondMaster 600 — Getting Started Guide
Instrument
settings
Function keys
), ALARM (
),