Olympus Camedia C-2500L 추가 기능 - 페이지 19

{카테고리_이름} Olympus Camedia C-2500L에 대한 추가 기능을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus Camedia C-2500L 33 페이지. External flash or strobes not firing with olympus cameras
Olympus Camedia C-2500L에 대해서도 마찬가지입니다: 브로셔 및 사양 (9 페이지), 브로셔 및 사양 (2 페이지), 문제 해결 (3 페이지)

페이지 인쇄
Olympus Camedia C-2500L 추가 기능

Setting Flash Control

Flash control is set as follows.
1
2
3
4

Quick Focus

Quick focus lets you focus on objects easily. The focal distance must be set in advance from its menu.
1
2
3
1
Set the mode dial to "P", "A" or "M".
2
Press the [
] button.
3
Align the cursor with
ton.
4
Set exposure compensation with the right / left point of the jog
dial.
Pressing the left point of the jog dial moves the cursor to the direction
of (-) compensation by 1/3 EV steps.
Pressing the right point of the jog dial moves the cursor to the direc-
tion of (+) compensation by 1/3 EV steps.
Exposure compensation is in the range of ±2EV.
5
Press the [OK] button.
Automatic Flash Control
The amount of flash is controlled for both the extension flash and the
built-in flash when you select the "TTL-AUTO" mode and use them simul-
taneously.
The amount of flash is controlled for the built-in flash only when you
select the "MANUAL" mode and use them simultaneously.
NOTE
• When the shutter speed is fast, the camera does not fully effect this
function.
Taking Quick Focus Pictures
1
Set the mode dial to "P", "A" or "M".
2
While holding down the [OK] button, press the shutter release
button down halfway.
Focus will be locked at the set focal distance (P. 48), and the green
lamp will light in the viewfinder.
The focal distance will be displayed on the control panel.
If the focal distance of manual focus is displayed, however, the focal
distance of quick focus will not be displayed.
3
Press the shutter release button down all the way.
The picture will be taken at the set focal distance.
MEMO
• Quick focus cannot be used if the shutter release button is pressed
down halfway before holding down the [OK] button.
• If using a flash, take the picture within the flash illumination range for
the flash illumination range, see "Flash illumination Range" (P. 20).
• This function is convenient for taking images of hard-to-auto focus
subjects.
• Sudden temperature change or other external effect may cause the
focus setting to deviate. If this happens, try to take pictures with the
focus setting one step closer or farther.
with the top / bottom point of the but-
E
E-47