Olympus Camedia C-2500L 추가 기능 - 페이지 3

{카테고리_이름} Olympus Camedia C-2500L에 대한 추가 기능을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus Camedia C-2500L 33 페이지. External flash or strobes not firing with olympus cameras
Olympus Camedia C-2500L에 대해서도 마찬가지입니다: 브로셔 및 사양 (9 페이지), 브로셔 및 사양 (2 페이지), 문제 해결 (3 페이지)

페이지 인쇄
Olympus Camedia C-2500L 추가 기능

Infinity Mode

The infinity mode is used to take pictures of faraway subjects.
2
Infinity

Manual Focusing

It is possible to set the distance manually and focus on subjects. Manual focusing is effective with - for example - subjects which
cannot be brought into focus with the autofocus feature (P.17).
2
5
2
3
4
1
Set the mode dial to "P", "A" or "M".
2
Press the [FOCUS] button.
Check that
If it does not appear, press the [FOCUS] button a number of times
1
until it appears.
3
Press the shutter release button down all the way.
1
Set the mode dial to "P", "A" or "M".
2
Press the [FOCUS] button.
Check that
1
If it does not appear, press the [FOCUS] button a number of times
until it appears.
3
3
Set the focal distance with the top / bottom point of the jog dial.
If a picture was already taken with manual focusing, the previous
value will be displayed.
Values displayed on the LCD are just standard references.
4
Press the shutter release button down halfway.
Shutter speed and aperture will be displayed on the control panel.
5
Press the shutter release button down all the way.
To change the focal distance again, press the [FOCUS] button.
MEMO
• Pressing the shutter release button with the [OK] button held down
will enable quick focus mode.
• It is recommended to check the focus of the images right after taking
them.
• The unit of distance can be meters (m) or feet (ft) (P. 75).
• Only the following operations are available during manual focusing
distance setting operation: – Card change. – Mode dial. – ON/OFF
button. – Shutter release button. – Card compartment cover open-
ing/closing. – Flash opening/closing. – Zooming. – Jog dial up/down.
– Focus locking.
• Sudden temperature change or other external effect may cause the
focus setting to deviate. If this happens, try to take pictures with the
focus set one step closer or farther.
mark appears on the control panel.
appears on the control panel.
E
E-31