Olympus CAMEDIA C-3030 Zoom 카메라 매뉴얼

{카테고리_이름} Olympus CAMEDIA C-3030 Zoom에 대한 카메라 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus CAMEDIA C-3030 Zoom 3 페이지. External flash or strobes not firing with olympus cameras
Olympus CAMEDIA C-3030 Zoom에 대해서도 마찬가지입니다: 브로셔 및 사양 (9 페이지), 빠른 시작 (2 페이지), 매뉴얼 (30 페이지), 문제 해결 (3 페이지)

페이지 인쇄

Recommended Camera settings for OneShot360™

After attaching the OneShot360 unit and powering the camera on in A/S/M mode:

• Image Quality: Press the menu button, located on the lower right side of

the LCD screen, and use the jog dial to set the image quality to SHQ for

best quality.

• Zoom: Use the Zoom to exactly fill the digital camera LCD viewer screen

with the circular image. Push or pull the lever on the outside of the shutter

release button to achieve this. If you zoom in too much, you will lose part

of the field of view. If you zoom in too little, you will not get maximum

resolution. Note also that the OneShot360 image may not be exactly

centered in the LCD screen – this is normal.

• White Balance: Set the white balance to Automatic. This setting is

adequate for most shots. To set the white balance, press the Menu button,

and press the down arrow on the jog dial until you have selected WB. Use

the right arrow to see the white balance options, and select the AUTO

setting. Press the OK button to finalize your selection.

• Flash: Disable the flash by pressing the flash button until you see the

flash disabled icon in the control panel. The flash button is located to the

left of the jog dial.

• Focus: To focus your OneShot360 image, manually set the focal

distance. To do this, press the MF button, and then press the right arrow

on the jog dial to select MF for manual focus. Now you can use the

up/down arrows on the jog dial to set a manual focus distance. A setting of

10 feet is recommended.

• Aperture Priority Mode: Set the camera to aperture priority ("A") mode.

To do this, press the menu button, and then use the down arrow until you

see the A/S/M mode selection. Now use the right arrow to see the

selections and choose A for Aperture Priority. Use the OK button to

finalize your selection.

• Aperture: Use the up/down arrows to select an aperture setting of f7.0.

Take care to watch the shutter speed when in aperture priority mode. If

the light level is low, you may need a tripod when the shutter speed is

slower than 1/125sec.

Doc. 000235, Rev. B

Camera

Guide

Olympus C-3030 Zoom

Page 1 of 3

EMOTE

EALITY

4 Technology Drive

Westborough, MA 01581-0756

866-898-1010