Olympus Camedia D-370 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Olympus Camedia D-370에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus Camedia D-370 2 페이지. Olympus camedia digital camera quick start guide
Olympus Camedia D-370에 대해서도 마찬가지입니다: 운영 매뉴얼 (23 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

EXPOSURE COMPENSATION

This mode enables you to change the brightness of the image.

1 Press the

button with the lens barrier open to display the Camera menu screen.

2 Select [CAMERA] using the

3 Select [

] using the

4 Adjust the compensation using the

(for a brighter image), and press the

5 Press the

button again to exit the menu.

6 Take the picture.

Close the lens barrier to return to 0.0 (default setting).

Note

METERING MODE (

1 Press the

button with the lens barrier open to display the Camera menu screen.

2 Select [CAMERA] using the

3 Select [

] using the

4 Select the Metering mode setting using the

5 Press the

button again to exit the menu.

6 Take the picture.

• Metering mode settings

Note

ESP (No display)

The camera measures the light at the center of the

picture and around the periphery of the picture separately

and then selects the optimal exposure.

SPOT (

)

The camera measures only the light levels at the center

of the image, allowing you to obtain the correct exposure

for backlit subjects since the exposure is not affected by

the background light.

• Close the lens barrier to return to ESP (default setting).

WHITE BALANCE (

1 Press the

button with the lens barrier open to display the Camera menu screen.

2 Select [PICTURE] using the

3 Select [

] using the

4 Select the white balance using the

5 Press the

button again to exit the menu.

6 Take the picture.

• White balance settings

Note

Auto (no display)

Automatically adjusts the white balance to ensure natural

colors

Daylight (

)

Ensures natural colors outdoors in full daylight (sunny

weather)

Cloudy (

)

Ensures natural colors outdoors in overcast daylight

(cloudy weather)

Tungsten (

)

Ensures natural colors under tungsten lighting

Fluorescent (

)

Ensures natural colors under fluorescent lighting

• Close the lens barrier to return to Auto mode (default setting).

IMAGE QUALITY (SHQ, HQ, SQ1, SQ2)

1 Press the

button with the lens barrier open to display the Camera menu screen.

2 Select [PICTURE] using the

3 Select [

] using the

4 Select the image quality using the

5 Press the

button again to exit the menu.

6 Take the picture.

• Image quality modes (pixel size)

Note

1280 × 960 pixels (For clear prints)

SHQ

1280 × 960 pixels (For viewing images on a PC)

1024 × 768 pixels (For e-mail attachments)

SQ1

640 × 480 pixels (For taking a lot of pictures)

SQ2

• The image quality setting remains when the lens barrier is closed.

I PLAYING BACK PICTURES

To turn the monitor on : Press the

on.

To turn the monitor off : Press the

•

button : Displays the previous image.

Note

•

button : Displays the next image.

•

button : Displays several images. Press the

If you press the

the previous image, and if you press the

next image.

button : Magnifies the image (1.5× → 2× → 2.5× → 3×). Press the

•

to return to 1×.

If you press the

is enabled.

Press the

or right.

Press the

ERASING AN IMAGE

1 Display the image you want to erase.

2 Press the

button for at least 1 second to display the menu.

3 Select [

] using the

erased.

buttons and press the

button.

buttons and press the

button.

button (for a darker image) and the

button.

)

buttons and press the

button.

buttons and press the

button.

buttons and press the

)

buttons and press the

button.

buttons and press the

button.

buttons and press the

button.

buttons and press the

button.

buttons and press the

button with the lens barrier closed to turn the monitor

button again to turn the monitor off.

button to return.

button in multi-display, the green frame moves to

button, it moves to the

button while magnifying the image, scroll mode

buttons to move the image up, down, left

button again to exit scroll mode.

buttons and press the

button. The image will be

ERASING ALL IMAGES

• When erasing images in the internal memory, do not insert a SmartMedia card.

• When erasing images on a SmartMedia card, insert the card before following the

Caution

procedure below.

1 Press the

button

2 Press the

3 Select [SETUP] using the

4 Select [

5 Select [

6 Select [

will be erased.

Once erased, images cannot be restored. Before erasing, make sure that you are

not erasing important data.

Caution

PROTECT (

button.

1 Display the image you want to protect.

2 Press the

Protected images cannot be erased by [Erasing an image] or [Erasing all images],

but they will all be erased by formatting.

Caution

• The protect setting is saved when the lens barrier is closed.

Note

• To cancel the protect setting, press the

I RECORDING/PLAYING BACK MOVING IMAGES ( )

Taking moving images

1 Press the

2 Select [CAMERA] using the

3 Select [DRIVE] using the

4 Select [

5 Press the

6 Record the moving images by looking at the monitor. (Press the Shutter button to

start recording moving images. Recording stops when the Shutter button is pressed

button.

again.)

Movie mode is canceled when the monitor is turned off by pressing the

Note

Playing back moving images

1 Press the

Display the image with the

2 Press the

3 Select [PLAY] using the

4 Select [

5 Select [START] using the

be played back.

I TURNING BEEP SOUND OFF

1 Press the

2 Select [SETUP] using the

3 Select [

4 Select [OFF] using the

button.

5 Press the

The beep sound setting remains when the lens barrier is closed.

Note

I ADJUSTING THE MONITOR BRIGHTNESS

1 Press the

2 Select [SETUP] using the

3 Select [

4 Adjust the monitor brightness using the

monitor) and press the

5 Press the

The monitor brightness setting remains when the lens barrier is closed.

Note

Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel.631-844-5000

(Technical support) Tel.1-888-553-4448 (Toll-free) (First 30 days after purchase)

(Premises/Goods delivery) Wendenstraße 14-18, 20097 Hamburg, Germany. Tel. 040-237730

button

(Hotline Numbers for customers in Europe)

Tel. 01805-67 10 83

Tel. 00800-67 10 83 00

Tel. +49 180 5-67 10 83

Tel. +49 40-237 73 899

Our Hotline is available from 9 am to 6 pm (Monday to Friday)

(E-Mail) [email protected]

Printed in Japan

1AG6P1P1038-A

button with the lens barrier closed.

button to display the Play menu screen.

buttons and press the

] or [

] using the

buttons and press the

ALL ERASE] using the

] using the

buttons and press the

)

button for at least 1 second. The

button with the lens barrier open to display the Camera menu screen.

buttons and press the

MOVIE] using the

buttons and press the

button again to exit the menu. The monitor will turn on.

button with the lens barrier closed.

symbol indicated.

button to display the Play menu screen.

buttons and press the

] using the

buttons and press the

button and press the

button with the lens barrier open to display the Camera menu screen.

buttons and press the

] using the

buttons and press the

button again to exit the menu.

button with the lens barrier open to display the Camera menu screen.

buttons and press the

] using the

buttons and press the

(for a darker monitor) or

button.

button again to exit the menu.

OLYMPUS AMERICA INC.

(Technical support) Tel. 1-631-844-5520 (After 30 days)

[email protected]

OLYMPUS OPTICAL CO.(EUROPA) GMBH.

(Letters) Postfach 10 49 08, 20034 Hamburg, Germany.

for Germany

for Austria, Belgium, Denmark, France, Netherlands, Norway,

Sweden, Switzerland, United Kingdom

for Finland, Italy, Luxemburg, Portugal, Spain, Czech

Republic

for Greece, Croatia, Hungaria and the Rest of Europe

button.

buttons and press the

button.

button. All the images

symbol will be displayed.

button again for at least 1 second.

button.

button. The image will

button.

(for a brighter

VT274602