Olympus DP12 사용 설명서 - 페이지 14

{카테고리_이름} Olympus DP12에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus DP12 48 페이지. Microscope digital camera system

Fig. 5

Fig. 6

Inserting (Removing) the SmartMedia

# Make sure the main switch is set to "

# A 3.3 V SmartMedia card manufactured by Olympus or marketed in

stores can be used.

However, when using a non-Olympus 3.3 V SmartMedia, it may be

necessary to format it (see page 29).

# A 5 V SmartMedia marketed in stores cannot be used with this cam-

era system.

1. Open the card cover 1.

2. Hold the SmartMedia 2 so that the contact area faces downward, and

insert it all the way into the slot on the camera unit.

3. Close the card cover.

Removal

Push the inserted SmartMedia further into deep. This causes the

SmartMedia pop out so that you can remove it with your hand.

# Do not use other method than the above to remove the SmartMedia

or attempt simply pull it out of the slot.

Card Access Indicator LED (Fig. 6)

The CARD access indicator 1 blinks when an access is made to the

SmartMedia. Do not open the card cover or unplug the power cord while

the indicator is blinking.

# Otherwise, the picture data recorded in the SmartMedia may be

destroyed.

DP12

(Fig. 5)

" (OFF) before insertion.