Olympus DP70 사용자 설명서 - 페이지 21

{카테고리_이름} Olympus DP70에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus DP70 38 페이지. Application software

Camera settings

Gain

(White Balance)

By default, when you acquire images, no pseudo color tables will be used. In this

case, the

Pseudo Color > Off

Select the

Use high/low pseudo color table

intensity value displayed in blue, and all of those with a high intensity value displayed

in red. When you acquire this image, it will show all of the pixels in their actual color.

With this pseudo color table you can immediately see if the image is well illuminated.

When there are both blue and red pixels in the image, the camera's complete

dynamic range will be in use. If too many blue pixels can be seen, the image is under-

exposed. If too many red pixels can be seen, the image is overexposed.

Color

Use this dialog box in the

manually.

You can change the

Gain

move their slide controls. R, G and B stand for the Red, Green and Blue color chan-

nels.

With the

Gain (White Balance)

separately. Increase, e.g. the R value, to increase the amount of red in the image.

Normally, you should never alter the gain value manually. Instead, use the

Balance

command, in the

balance will be automatically adopted in the fields of this dialog box.

The

Gain (White Balance)

types "24 bit RGB Color" or "48 bit RGB Color" (see

option is selected.

option to have all of the pixels with a low

Camera Settings

to change the camera's color settings

parameter for each color channel separately. To do this,

value, you can weight the individual color channels

Camera Control

tool window. The results of the white

group is only available when you have selected the image

Image Type

on page 18).

White